Etusivu TRUMPF Laser TruMicro Series 5000
TruMicro Series 5000
The lasers of the TruMicro series 5000 are ultra-short pulsed lasers with power of up to 100 watts and pulse energy of up to 250 microjoules. The extremely short pulses, of less than 10 picoseconds vaporize nearly any material so quickly that no heat affected zone can be detected. These lasers allow microprocessing with an optimum combination of quality, productivity and cost-effectiveness.
Yleistä
Easy scaling
The decisive advantage of TRUMPF picosecond lasers is their simple scaling in power classes of up to 100 watts, at pulse energies of up to 250 microjoulses. Penetration of these power classes is only possible with disk laser technology. It is superior to other technologies with respect to power and pulse energy, and still has outstanding beam quality.
Simple production
High peak pulse powers of up to 40 megawatts allow efficient frequency conversion into the visible and ultraviolet spectral ranges. Semiconductor materials, dielectrics and plastics can therefore be processed with very high quality and high throughput.
Simply efficient
The high average power of up to 100 watts guarantees high production throughput. Moreover, the total cost of the ultra-short pulsed lasers in the TruMicro Series 5000 over their service lifetime are so low they have no competitors in the industry.
Ominaisuudet
- Cold material processing: Productive without heating
- High average power, best beam quality: High-productivity microprocessing
Tekniset tiedot
| | TruMicro 5025 | TruMicro 5050 | TruMicro 5070 | TruMicro 5080 |
|---|
| Wavelength | 1030 nm | 1030 nm | 1030 nm | 1030 nm |
| Average power | 25 W | 50 W | 100 W | 150 W |
| Beam quality M² | < 1.3 | < 1.3 | < 1.3 | < 1.3 |
| Max. pulse energy | 125 µJ | 250 µJ | 250 µJ | 500 µJ |
| Pulse duration | < 10 ps | < 10 ps | < 10 ps | < 10 ps |
| Min. repetition rate | 200 kHz | 200 kHz | 400 kHz | 300 kHz |
| Max. repetition rate | 400 kHz | 800 kHz | 600 kHz | 1000 kHz |
| Cooling water temperature range | 5 °C – 23 °C | 6 °C – 21 °C | 5 °C – 21 °C | 5 °C – 21 °C |
| Dimensions laser head | | | | |
| 1005 mm | 1005 mm | 1005 mm | 675 mm |
| 319 mm | 319 mm | 319 mm | 279 mm |
| 605 mm | 605 mm | 605 mm | 1052 mm |
| Dimensions supply unit | | | | |
| 442 mm | 442 mm | 442 mm | 445 mm |
| 1392 mm | 1392 mm | 1192 mm | 1115 mm |
| 608 mm | 608 mm | 805 mm | 805 mm |
| | TruMicro 5225 | TruMicro 5250 | TruMicro 5270 | TruMicro 5350 |
|---|
| Wavelength | 515 nm | 515 nm | 515 nm | 343 nm |
| Average power | 15 W | 30 W | 60 W | 10 W |
| Beam quality M² | < 1.3 | < 1.3 | < 1.3 | < 1.3 |
| Max. pulse energy | 75 µJ | 150 µJ | 150 µJ | 50 µJ |
| Pulse duration | < 10 ps | < 10 ps | < 10 ps | < 10 ps |
| Min. repetition rate | 200 kHz | 200 kHz | 400 kHz | 200 kHz |
| Max. repetition rate | 400 kHz | 800 kHz | 600 kHz | 400 kHz |
| Cooling water temperature range | 6 °C – 21 °C | 6 °C – 21 °C | 5 °C – 21 °C | 6 °C – 21 °C |
| Dimensions laser head | | | | |
| 1005 mm | 1005 mm | 1005 mm | 1005 mm |
| 319 mm | 319 mm | 319 mm | 319 mm |
| 605 mm | 605 mm | 605 mm | 605 mm |
| Dimensions supply unit | | | | |
| 442 mm | 442 mm | 442 mm | 442 mm |
| 1392 mm | 1392 mm | 1192 mm | 1392 mm |
| 608 mm | 608 mm | 805 mm | 608 mm |
| | TruMicro 5360 |
|---|
| Wavelength | 343 nm |
| Average power | 15 W |
| Beam quality M² | < 1.3 |
| Max. pulse energy | 37.5 µJ |
| Min. repetition rate | 400 kHz |
| Max. repetition rate | 800 kHz |
| Cooling water temperature range | 6 °C – 21 °C |
| Dimensions laser head | |
| 1005 mm |
| 319 mm |
| 605 mm |
| Dimensions supply unit | |
| 442 mm |
| 1392 mm |
| 608 mm |
Subject to alterations. The specifications in our offer and our sales order confirmation are authoritative.
