Robots, lasers, processing optics, enclosed protective housing, and positioners – TruLaser Weld 5000 is a turn-key system for automatic laser welding. You can flexibly weld deep and strong seams or nicely rounded, smooth seams using one system. FusionLine also enables you to connect components with gaps. The versatile system can be precisely tailored to meet your needs with different component positioners.
The new BrightLine scan welding process enables you to robustly and flexibly weld small joint gaps, specifically adjust seam widths, and influence weld flaking. Elevate your laser welding work to a new level by adding new areas of application, such as thick sheet metal and aluminum, and reducing the amount of spatter.
Heat conduction welding, deep penetration welding, or FusionLine filler wire that allows you to close gaps up to 1 mm wide – all on just one machine.
Functions such as the rotatable control panel and the additional status monitor make your work easier. Different component positioners are available depending on the desired loading option.
With the simple TruTops Weld offline programming system
The TeachLine sensor system reliably detects the seam placement.
The rotary module makes it easier to access your components allowing you to weld faster. The shielding gas nozzle rotates continuously around the optics. The robot does not need to reorient itself.
This allows you to close gaps up to 1 mm wide and to laser-weld economically without optimizing your component portfolio for laser welding. The benefit for you: The machine can process more components and your capacity increases.
|TYPE||High accuracy robot|
|NUMBER OF AXES||6|
|REPEATABILITY||+/- 0.05 mm|
|POSSIBLE CABIN DIMENSIONS||4800 mm x 4800 mm x 3200 mm|
4800 mm x 5950 mm x 3200 mm
5950 mm x 4800 mm x 3200 mm
5950 mm x 5950 mm x 3200 mm
7100 mm x 4800 mm x 3200 mm
8250 mm x 4800 mm x 3200 mm
|ROTATE AND TILT POSITIONER|
|TYPICAL MAXIMUM PART SIZE||2000 mm x 1000 mm x 700 mm|
|MAXIMUM LOADING||400 kg|
|MAXIMUM WORK AREA||1600 mm x 800 mm x 1200 mm|
|MAXIMUM LOADING (PER SIDE)||250 kg|
|MAXIMUM WORK AREA||2000 mm x 1000 mm x 1100 mm|
|MAXIMUM LOADING (PER SIDE)||750 kg|
|TYPICAL MAXIMUM PART SIZE||4000 mm x 1500 mm x 1000 mm|
|MAXIMUM LOADING||1000 kg|
|AVAILABLE LASERS||TruDisk 2000, 3001, 3002, 4001, 4002, 5001, 5002, 6001, 6002, 8001, 8002|
Laser Community issue 35: New era in beam generation: It will be possible to scan whole bridges, noninvasively inspect huge…Show all news
Museokatu 7 (map)
FI-11100 RIIHIMÄKI, FINLAND
Tel: +358 (0) 10 217 6560
Fax: +358 (0) 10 296 6560