BEO, CFO ja RFO optiikka

BEO D25 are the smallest optics in the range and the best suited for laser welding applications involving low laser power.

Laser device: TruPulse

Laser power: max. 200 W

BEO D35 focusing optics are used for welding with solid-state lasers up to the kilowatt range, and can also be fitted with a CCD camera.

Laser devices: TruDisk, TruPulse, TruFiber, TruDiode

Laser power: max. 4 kW

BEO D50 processing optics is robust and compact optics which can be used up to a power of 8 kW. 

Laser devices: TruDisk, TruPulse, TruFiber, TruDiode
Laser power: max. 8 kW

BEO D70 focusing optics show their strengths during laser welding involving large working distances and small focal diameters.

Lasers: TruDisk, TruDiode, TruFiber, TruPulse
Laser power: 8 kW and higher

With the controlled focusing optics of the CFO line, parameters which are relevant to the process, such as water temperature and shielding gas flow, are recorded during processing. 

Lasers: TruDisk, TruDiode, TruFiber, TruPulse
Laser power: max. 8 kW

The RFO high-performance mirror optics are optics for the lowest thermal shifts. They allow for consistent, reproducible application results, even with a high laser power.

Laser: TruDisk
Laser power: 16 kW and higher

The focusing optics for simultaneous welding of plastics with ring focus is optimally suited for highly productive systems. The ring diameter is calculated by means of an assembly in the BEO modular system, in a customer-specific manner. This allows radial or axial weld seams to be achieved without moving the component or the laser beam.

Laser device: TruDiode
Laser power: < 1 kW